• 官方企业微信
  • 扫码添加,快速咨询
  • 微信公众号
  • 扫码关注,了解更多资讯

400-168-6065

项目咨询

请填写以下表单
我们的销售代表会尽快与你联系
姓名:
邮箱:
电话:
城市:
交换机 PSE803BT 千兆POE以太网供电器

PSE803BT 千兆POE以太网供电器

●POE口最大输出功率90W
●支持标准:IEEE 802.3af/at/bt 、 IEEE 802.3 10Base-T/100Base-TX/IEEE802.3ab
●1000Base-T
●浪涌(Surge):网口共模6KV;静电(ESD):空气8KV,接触6KV
●系统可靠性:MTBF>10万小时
●防尘、静音设计

产品特性

技术参数

下载 & FAQ

控标参数

型号选配

PSE803BT 是单端口千兆 POE 以太网供电设备,完全符合 IEEE 802.3af/at/bt 标准,可将电能加载在网线上进行传输,支持 10/100/1000M 速率,最大传输距离为 100m 。该 PoE 供电器具有一个普通网络输入端口以及一个 PoE 输出端口、 AC 电源输入口。兼容中间跨接法和末端跨接法;设备将普通网络数据信号整合成带 POE 供电的信号后输出;最大输出功率为 90W ,该设备可以为以太网设备,如 11ac 无线 AP 、网络电话机、高速球机、 LED 智联照明、数字标牌、销售点 (POS) 终端、卫星数据网络等提供符合 IEEE802.3af/at/bt 标准的 PoE 供电以及网络传输应用。采用以太网网线供电方式,可提高系统可靠性、拓展传统电力线网络,减少电力线使用,方便布线。



【产品介绍】

●电源具有输入过欠压、输出过压、输出过流、短路保护等功能

POE 口最大输出功率 90W

●支持标准: IEEE 802.3af/at/bt 、 IEEE 802.3 10Base-T/100Base-TX/IEEE802.3ab

1000Base-T

●浪涌( Surge ):网口共模 6KV ;静电( ESD ):空气 8KV ,接触 6KV

●系统可靠性:M TBF 10 万小时

●防尘、静音设计



【支持APOLLO 可视化云端管理运维——“139" 模式】
· 1:设备集中至1个平台即APOLLO平台统一管理运维。
· 3:设备可通过移动端、PC端、本地端3种方式进行管理运维。
· 9:APOLLO平台可实现9大核心技术服务板块——云端拓扑,资源可视化,风险预警、防患于未然,AI 加持智能调度,业务分析、决策有据可依,实景地图、快速故障定位,云端运维、配置、升级批量处理,多用户、多维权限、分级管控,开放接口、客户业务导入。



输入电源
100-240V AC@50/60Hz
传输速率
10/100/1000Mbps
POE供电方式
中间跨接法,未端跨接法
传输距离
最大100米
POE输出电压
54V DC
POE输出功率
最大90W
POE供电线对
4Pair:3/6/4/5(+),1/2/7/8/(-)
防护等级
浪涌:网口共模6KV     静电:空气8KV 接触6KV

尺寸 ( 长 x 宽 x 高 )
165*62*38.5mm
环境规范:
工作温度:0°~40°C  存储温度:-40℃~70℃  工作湿度:10%~90%,无冷凝
标准合规性
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-Tx Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000 Base-X IEEE 802.3az EEE support IEEE 802.3x flow control IEEE 802.3ad LACP aggregation IEEE 802.1AB LLDP/LLDP-MED IEEE 802.1D Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) (RSTP) IEEE 802.1Q VLAN tagging IEEE 802.1p CoS support IEEE 802.1X Port authentication Resilience and Availability IEEE 802.1D Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad LACP
IP路由
BGP BGPv4/v4+ 4bytes AS Text/MD5 for BGPv4 VRF-Lite IPv4 Static Route RIPv1/v2 OSPFv2 BGPv4 Bidirectional Forwarding Detection (BFD) for OSPF OSPF OSPF v2/v3 OSPF passive interface Stub/NSSA area OSPF equal cost route Text/MD5 for OSPFv2 Static Route Max. 512 IPv4 entries Max. 256 IPv6 entries IPv4/IPv6 Default Route PBR (Policy-based Route) IPv4/v6 Static Route RIP VRRP RIPv1/v2/ng
VLAN
802.1Q Double VLAN (Q-in-Q) Port-based Q-in-Q Selective Q-in-Q Port-based VLAN MAC-based VLAN Subnet-based VLAN VLAN Group Max. 4K VLAN groups Max. 4094 VIDs Multicast VLAN (ISM VLAN for IPv4/IPv6) Voice VLAN Auto Surveillance VLAN VLAN Trunking GVRP: Up to 4K dynamic VLANs Asymmetric VLAN Rate limiting: policy-based/port Based bandwidth control with 64kbps granularity Port-based egress traffic shaping IEEE 802.1p with 8 priority queues Per port DSCP/DSCP to 802.1p prioritymapping Congestion control on all ports Selective Q-in-Q
安全
802.1X Port security Layer 2 MAC filtering Layer 3 IP filtering Layer 4 TCP/UDP socket filtering Static MAC forwarding Multiple RADIUS servers Multiple TACACS+ servers 802.1x VLAN and 802.1p assignment by RADIUS Login authentication by RADIUS Login authentication by TACACS+ TACACS+ accounting Authorization on RADIUS Authorization on TACACS+ SSH v2 SSL Intrusion lock MAC freeze MAC search MAC filtering DHCP snooping ARP inspection Static IP-MAC-Port binding Policy-based security filtering Port isolation Limited MAC number per port IP source guard Guest VLAN IEEE 802.1Q tag-based and port-based VLAN GVRP automatic VLAN memberregistration Full range 4K PVID support Limited MAC number per port IP filtering TCP/UDP socket filtering BPDU transparency IEEE 802.1X port-based Authentication Enhanced 802.1X compensation Assignment over VLAN Layer 2 protocol tunneling Root guard BPDU guard Storm control: Broadcast, multicast Unknown unicast (DLF)
服务质量(QoS)
802.3x flow control 802.1p Class of Service (SPQ, WFQ,WRR, hybrid-SPQ combination capable) DiffServ (DSCP) Port-based rate limiting (ingress/egress) Rate limiting per IP/TCP/UDP per port Policy-based rate limiting Layer 2 Multicast
IPv6
IPv6 over Ethernet (RFC 2464) IPv6 addressing architecture (RFC 4291) Dual stack (RFC 4213) ICMPv6 (RFC 4443) Path MTU (RFC 1981) Minimum path MTU size of 1280 (RFC5095) Encapsulation for maximum PMTU of 1500 Neighbor discovery (RFC 4861) DHCPv4/v6 server/relay Default DHCP client mode
设备管理
SNMP v1, v2c, v3 SNMP trap group RMON (1, 2, 3, 9) Custom default Syslog (IPv4/IPv6) ICMP echo/echo reply IEEE 802.1AB LLDP IEEE 802.1AB LLDP-MED Display port utilization Web interface Management through Console Telnet, SNMP Remote firmware upgrade by FTP/Web/TFTP Configuration saving and retrieving Multiple logins supported Configure clone CLI DHCP relay per VLAN DHCP Client option 12 DHCP Auto-configuration DHCP Auto-image DHCP Relay option 60/61/62/18/37/125 DHCP/DHCPv6 Local Relay DHCP Server NTP Port mirroring: ingress/egress/bothport mirroring
链接聚合
Link Aggregation IEEE 802.3ad LACP link aggregation Static port trunking Up to 16 aggregation groups, 8 ports per group randomly selected Link aggregation algorithm source/destination IP address
MIB
RFC 1066 TCP/IP-based MIB RFC 1213, 1157 SNMPv2c/v3 MIB RFC 1493 bridge MIB RFC 1643 Ethernet MIB RFC 1757 RMON group 1, 2, 3, 9 RFC 2011, 2012, 2013 SNMPv2 MIB RFC 2233 SMIv2 MIB RFC 2358 Ethernet-like MIB RFC 2674 bridge MIB extension RFC 2819, 2925 remote management RFC 3621 power Ethernet MIB RFC 4022 management information Base for transmission control protocol RFC 4113 management information Base for user datagram protocol RFC 4292 IP forwarding table MIB RFC4293 Management Information Base (MIB) for IP Cable diagnostic MIB
资料下载

PSE803BT 是单端口千兆 POE 以太网供电设备,完全符合 IEEE 802.3af/at/bt 标准,可将电能加载在网线上进行传输,支持 10/100/1000M 速率,最大传输距离为 100m 。该 PoE 供电器具有一个普通网络输入端口以及一个 PoE 输出端口、 AC 电源输入口。兼容中间跨接法和末端跨接法;设备将普通网络数据信号整合成带 POE 供电的信号后输出;最大输出功率为 90W ,该设备可以为以太网设备,如 11ac 无线 AP 、网络电话机、高速球机、 LED 智联照明、数字标牌、销售点 (POS) 终端、卫星数据网络等提供符合 IEEE802.3af/at/bt 标准的 PoE 供电以及网络传输应用。采用以太网网线供电方式,可提高系统可靠性、拓展传统电力线网络,减少电力线使用,方便布线。



【产品介绍】

●电源具有输入过欠压、输出过压、输出过流、短路保护等功能

POE 口最大输出功率 90W

●支持标准: IEEE 802.3af/at/bt 、 IEEE 802.3 10Base-T/100Base-TX/IEEE802.3ab

1000Base-T

●浪涌( Surge ):网口共模 6KV ;静电( ESD ):空气 8KV ,接触 6KV

●系统可靠性:M TBF 10 万小时

●防尘、静音设计



【支持APOLLO 可视化云端管理运维——“139" 模式】
· 1:设备集中至1个平台即APOLLO平台统一管理运维。
· 3:设备可通过移动端、PC端、本地端3种方式进行管理运维。
· 9:APOLLO平台可实现9大核心技术服务板块——云端拓扑,资源可视化,风险预警、防患于未然,AI 加持智能调度,业务分析、决策有据可依,实景地图、快速故障定位,云端运维、配置、升级批量处理,多用户、多维权限、分级管控,开放接口、客户业务导入。



输入电源
100-240V AC@50/60Hz
传输速率
10/100/1000Mbps
POE供电方式
中间跨接法,未端跨接法
传输距离
最大100米
POE输出电压
54V DC
POE输出功率
最大90W
POE供电线对
4Pair:3/6/4/5(+),1/2/7/8/(-)
防护等级
浪涌:网口共模6KV     静电:空气8KV 接触6KV

尺寸 ( 长 x 宽 x 高 )
165*62*38.5mm
环境规范:
工作温度:0°~40°C  存储温度:-40℃~70℃  工作湿度:10%~90%,无冷凝
标准合规性
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-Tx Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000 Base-X IEEE 802.3az EEE support IEEE 802.3x flow control IEEE 802.3ad LACP aggregation IEEE 802.1AB LLDP/LLDP-MED IEEE 802.1D Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) (RSTP) IEEE 802.1Q VLAN tagging IEEE 802.1p CoS support IEEE 802.1X Port authentication Resilience and Availability IEEE 802.1D Spanning Tree Protocol(STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad LACP
IP路由
BGP BGPv4/v4+ 4bytes AS Text/MD5 for BGPv4 VRF-Lite IPv4 Static Route RIPv1/v2 OSPFv2 BGPv4 Bidirectional Forwarding Detection (BFD) for OSPF OSPF OSPF v2/v3 OSPF passive interface Stub/NSSA area OSPF equal cost route Text/MD5 for OSPFv2 Static Route Max. 512 IPv4 entries Max. 256 IPv6 entries IPv4/IPv6 Default Route PBR (Policy-based Route) IPv4/v6 Static Route RIP VRRP RIPv1/v2/ng
VLAN
802.1Q Double VLAN (Q-in-Q) Port-based Q-in-Q Selective Q-in-Q Port-based VLAN MAC-based VLAN Subnet-based VLAN VLAN Group Max. 4K VLAN groups Max. 4094 VIDs Multicast VLAN (ISM VLAN for IPv4/IPv6) Voice VLAN Auto Surveillance VLAN VLAN Trunking GVRP: Up to 4K dynamic VLANs Asymmetric VLAN Rate limiting: policy-based/port Based bandwidth control with 64kbps granularity Port-based egress traffic shaping IEEE 802.1p with 8 priority queues Per port DSCP/DSCP to 802.1p prioritymapping Congestion control on all ports Selective Q-in-Q
安全
802.1X Port security Layer 2 MAC filtering Layer 3 IP filtering Layer 4 TCP/UDP socket filtering Static MAC forwarding Multiple RADIUS servers Multiple TACACS+ servers 802.1x VLAN and 802.1p assignment by RADIUS Login authentication by RADIUS Login authentication by TACACS+ TACACS+ accounting Authorization on RADIUS Authorization on TACACS+ SSH v2 SSL Intrusion lock MAC freeze MAC search MAC filtering DHCP snooping ARP inspection Static IP-MAC-Port binding Policy-based security filtering Port isolation Limited MAC number per port IP source guard Guest VLAN IEEE 802.1Q tag-based and port-based VLAN GVRP automatic VLAN memberregistration Full range 4K PVID support Limited MAC number per port IP filtering TCP/UDP socket filtering BPDU transparency IEEE 802.1X port-based Authentication Enhanced 802.1X compensation Assignment over VLAN Layer 2 protocol tunneling Root guard BPDU guard Storm control: Broadcast, multicast Unknown unicast (DLF)
服务质量(QoS)
802.3x flow control 802.1p Class of Service (SPQ, WFQ,WRR, hybrid-SPQ combination capable) DiffServ (DSCP) Port-based rate limiting (ingress/egress) Rate limiting per IP/TCP/UDP per port Policy-based rate limiting Layer 2 Multicast
IPv6
IPv6 over Ethernet (RFC 2464) IPv6 addressing architecture (RFC 4291) Dual stack (RFC 4213) ICMPv6 (RFC 4443) Path MTU (RFC 1981) Minimum path MTU size of 1280 (RFC5095) Encapsulation for maximum PMTU of 1500 Neighbor discovery (RFC 4861) DHCPv4/v6 server/relay Default DHCP client mode
设备管理
SNMP v1, v2c, v3 SNMP trap group RMON (1, 2, 3, 9) Custom default Syslog (IPv4/IPv6) ICMP echo/echo reply IEEE 802.1AB LLDP IEEE 802.1AB LLDP-MED Display port utilization Web interface Management through Console Telnet, SNMP Remote firmware upgrade by FTP/Web/TFTP Configuration saving and retrieving Multiple logins supported Configure clone CLI DHCP relay per VLAN DHCP Client option 12 DHCP Auto-configuration DHCP Auto-image DHCP Relay option 60/61/62/18/37/125 DHCP/DHCPv6 Local Relay DHCP Server NTP Port mirroring: ingress/egress/bothport mirroring
链接聚合
Link Aggregation IEEE 802.3ad LACP link aggregation Static port trunking Up to 16 aggregation groups, 8 ports per group randomly selected Link aggregation algorithm source/destination IP address
MIB
RFC 1066 TCP/IP-based MIB RFC 1213, 1157 SNMPv2c/v3 MIB RFC 1493 bridge MIB RFC 1643 Ethernet MIB RFC 1757 RMON group 1, 2, 3, 9 RFC 2011, 2012, 2013 SNMPv2 MIB RFC 2233 SMIv2 MIB RFC 2358 Ethernet-like MIB RFC 2674 bridge MIB extension RFC 2819, 2925 remote management RFC 3621 power Ethernet MIB RFC 4022 management information Base for transmission control protocol RFC 4113 management information Base for user datagram protocol RFC 4292 IP forwarding table MIB RFC4293 Management Information Base (MIB) for IP Cable diagnostic MIB
HOSmart平台APP下载
网桥精灵APP下载

全国服务热线

400-168-6065

周一至周六 9:00-12:00 13:30-18:00

Copyright©2011-2021 深圳市丰润达科技有限公司 版权所有 粤ICP备15049273号-1

如果您的浏览器未跳转,请点击此处进行游戏并领取优惠